Post Date: 2010-05-24 All good roller coasters begin with a model; a model shows possible buyers what the ride will look like, how stable it will be, and aids their choice about whether to purchase it or not. So here are a couple steps in making a roller coaster model that can afterwards become a real roller coaster ride.
Required Tools
Super glue
Normal marker
Permanent marker
Wire cutter
Required Materials
Paint
Your selection of material for the model (e.g., clay, tin)
1 yard of wire
Scenery pieces like artificial trees, miniature people, plants etc.
Plexiglass
Small pieces of plastic
Instructions
Settle on the sort of roller coaster you wish to make and pick the material you wish to use to make it. You can use clay, some kind of metal, or some people even use popsicle sticks and toothpicks, so decide which you wish to work with and begin.
Use the normal marker to draw the shape of the track onto the plexiglass, - the lift hill, inversions (loops), secondary hills, etc, and once you have finalized the shape, use the permanent marker to go over it to stop it from getting rubbed out. The structure, tracks and support are all very essential elements of the model and should be laid out clearly here. Now you can begin building.
Using the clay or other material of your choice start putting the model together. Take your time to put in each piece and install support pieces where necessary to guarantee the model is sturdy and firm and does not collapse.
Every roller coaster starts with a really high hill called the lift hill, this is because roller coasters typically are driven by gravity and the lift hill is the one spot on the track that an electric motor is used to move the coaster to the top and then gravity takes over. Therefore it is critical to perfect the height and shape of the lift hill.
To build the lift for your model, use a wire cutter to cut 3-4 pieces of the wire and place them side by side in the middle of the lift hill. Next choose 2 spots at the top and bottom of the lift hill that the lift will go through to join under the tracks. Then to the side of the lift hill, thread the wire below the supports to form a sort of chain until both ends meet. Glue the ends together and permit them to dry.
Using the glue put 2-3 additional pieces of wood on the top area of the lift hill to function as the launch section of the track, and also on the inversion and turn sections of the track. Lastly take the small pieces of plastic and glue them one by one along the inner section of the selected track to signify the magnetic mechanisms used to launch roller coasters. Paint and decorate your roller coaster, make a small train for aesthetics and your model is complete.
Now it is time to get out there and find a buyer to turn your model into a real ride!
Tips and Warnings
Because gravity is what keeps the coaster going, the length and height of the lift hill will be what provides the drive to keep the coaster going. Therefore bear this in mind when determining the height and slope of the lift hill.
Make your model on a surface which is the color of the ground, either brownish for dirt or green for grass.
As you make the model, contrast it to the plexiglass outline to make certain that all the track pieces and supports are where they ought to be and none are missing.
Article Source: http://www.easyarticlesubmit.comAdditional Articles From - Home | Industry Publications | Entertainment | Arts????? Bookmark This Article
Facebook, Twitter, Del.ici.ous, etc
View the original article here
This post was made using the Auto Blogging Software from WebMagnates.org This line will not appear when posts are made after activating the software to full version.
No comments:
Post a Comment